+ Click Here To Start A New Subject
Page 1 of 6 1 2 3 ... LastLast
Threads 1 to 20 of 111

Forum: Blacksmith Show and Tell

We all know what that means

  1. Iron Heart

    A friend recently gave me a coil of wrought iron telegraph wire and it brought back fond memories of the Colorado Ren Fair back in the 80's......I...

    Started by Bruce Macmillan‎, Today 07:24 AM
    3 Attachment(s)
    • Replies: 0
    • Views: 24
    Bruce Macmillan
    Today 07:24 AM Go to last post

  2. TP holder

    Forged this up for my Mom and Dad, from some 1/2 round. Did a wire wheel finish, with oil on that. Thought you all might like it.

    Started by sam salvati‎, 01-30-2012 05:22 PM
    • Replies: 5
    • Views: 198
    sam salvati
    02-02-2012 10:49 PM Go to last post

  3. Tiny hammer for tiny work

    Here is a hammer I made up for doing some BASIC chasing and engraving work I would like to try. 1045, going to have a nicer handle too this was just...

    Started by sam salvati‎, 02-01-2012 08:35 PM
    • Replies: 2
    • Views: 118
    sam salvati
    02-01-2012 11:12 PM Go to last post

  4. Integral Tomahawk Tutorial

    When i posted the first one of these, I got alot of "how the heck did you do that?!" responses, and while I explained it well enough I thought a...

    Started by sam salvati‎, 01-26-2012 12:15 AM
    • Replies: 9
    • Views: 241
    sam salvati
    01-26-2012 11:52 AM Go to last post

  5. Survival knives for Christmas

    Here is a pic of some survival knives I made for Christmas gifts. They were forged from OTS (old truck springs). Drew them out on the Little Giant...

    Started by Lynn Gledhill‎, 01-19-2012 08:18 PM
    1 Attachment(s)
    • Replies: 6
    • Views: 277
    Tom Allyn
    01-21-2012 11:59 PM Go to last post

  6. Triskele

    Between heats working on making some tongs, I forged this guy. Again, no welding, all forged from one piece of 1" by 3/8" by 2.5" long. It's about...

    Started by sam salvati‎, 01-19-2012 08:59 PM
    • Replies: 9
    • Views: 379
    Rashelle
    01-21-2012 11:13 PM Go to last post

  7. Raising a Phrygian Helmet

    This is a project I made a while back and thought I would post a slideshow of some of the process involved. Photos were taken before of after just...

    Started by saign charlestein‎, 12-28-2011 04:25 PM
    • Replies: 4
    • Views: 359
    steve m
    01-03-2012 08:40 AM Go to last post

  8. H&D

    My God Daughter Cara Hartsen has a woodshop she shares with her dad and wanted a sign for over the door that would also be a Christmas present to...

    Started by Bruce Macmillan‎, 12-11-2011 04:55 PM
    1 Attachment(s)
    • Replies: 4
    • Views: 356
    Lynn Gledhill
    12-11-2011 10:15 PM Go to last post

  9. A little different barbecue

    I did the metal on this, he did the brick. Got it done just in time for his 3oth wedding anniversary. He cooked a whole pig. The counterweights make...

    Started by Stretch‎, 12-10-2011 04:48 PM
    4 Attachment(s)
    • Replies: 3
    • Views: 344
    Brad Roland
    12-11-2011 02:33 PM Go to last post

  10. my new used tools

    I went to an auction today and got several things for good price the hammers were 10.00 they need a little work but worth it. the drill inwhich...

    Started by tony flesher‎, 12-10-2011 06:38 PM
    5 Attachment(s)
    • Replies: 2
    • Views: 236
    Stretch
    12-11-2011 07:50 AM Go to last post

  11. Screen Railing

    Took me a bit, got the dies figgered out to build the frame pieces in the flypress. The screen is going to be copper, using copper paint and the...

    Started by Stretch‎, 12-10-2011 04:56 PM
    5 Attachment(s)
    • Replies: 0
    • Views: 118
    Stretch
    12-10-2011 04:56 PM Go to last post

  12. Screen Railing

    Took me a bit, got the dies figgered out to build the frame pieces in the flypress. The screen is going to be copper, using copper paint and the...

    Started by Stretch‎, 12-10-2011 04:53 PM
    • Replies: 0
    • Views: 86
    Stretch
    12-10-2011 04:53 PM Go to last post

  13. Firepit

    Just got this done. It started as a 4 ft weld on pipe end. Put handles on it for moving around and rings in case they had a tractor. Put holders for...

    Started by Stretch‎, 12-02-2011 05:29 PM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 16
    • Views: 898
    Neil Gustafson
    12-09-2011 12:00 AM Go to last post

  14. Twisty Candlesticks

    I just dropped off a few candlesticks at a christmas art show.

    Started by Ries‎, 12-01-2011 04:03 PM
    3 Attachment(s)
    • Replies: 3
    • Views: 234
    Ries
    12-02-2011 03:53 PM Go to last post

  15. Square Corners Workshop With Shel Browder, my results.

    I just got back from my first blacksmith class which I took at John C Campbell with Charley Orlando on Oct. 31 and happened to find Shel Browder's...

    Started by Paul Stanley‎, 11-11-2011 02:14 PM
    1 Attachment(s)
    • Replies: 4
    • Views: 426
    Paul Stanley
    12-02-2011 12:05 AM Go to last post

  16. Cutthroat Door Handles

    One of the funner jobs in a while. 11ga., embellished and inflated.

    Started by nuge‎, 10-23-2011 07:56 AM
    2 Pages •
    1 2
    5 Attachment(s)
    • Replies: 14
    • Views: 1,001
    Stretch
    12-01-2011 10:06 PM Go to last post

  17. John and Becky Little on CBC

    John and Becky Little, Nova Scotia blacksmiths interviewed by Colleen Jones on CBC. Becky will be demonstrating at ABANA 2012...

    Started by Daryl‎, 11-18-2011 09:26 AM
    • Replies: 0
    • Views: 211
    Daryl
    11-18-2011 09:26 AM Go to last post

  18. Three Scroll Trivet Jig

    Greetings to the membership, the following is the thread mentioned in the Three Scroll Trivet article in the third quarter 2011 issue of the HIN. I...

    Started by czyforge‎, 11-16-2011 08:20 AM
    1 Attachment(s)
    • Replies: 0
    • Views: 188
    czyforge
    11-16-2011 08:20 AM Go to last post

  19. Entry Table

    Here are some pic's of a table I made this past week. When I first conceived the idea, I thought I could build it in a couple of hours....:wavespin:...

    Started by Lynn Gledhill‎, 11-07-2011 09:37 PM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 10
    • Views: 362
    Lynn Gledhill
    11-08-2011 08:12 PM Go to last post

  20. Non-Pointy Utensils

    I know, everybody likes to make knives- they are pointy, and sexy, and dangerous. I like em too. But lately I have really been getting into making...

    Started by Ries‎, 11-02-2011 06:05 PM
    3 Attachment(s)
    • Replies: 7
    • Views: 401
    Bob Schade
    11-07-2011 07:32 PM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 15 replies or 150 views
Hot thread with unread posts
More than 15 replies or 150 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules